Announcement

Collapse
No announcement yet.

Winter Project 2019

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Originally posted by sphereii View Post
    You know what they say with hindsight...
    Hahaha!!!

    Comment


      #62
      Originally posted by sphereii View Post
      Winter Project updated to 18.3.

      In order to update through the Mod Launcher, you will need to delete and re-install the mod.

      If you wish to remain on your 18.2, plus uncheck Refresh Mods Automatically, and you should be able to continue to play.
      On the 1st page of this post it says,

      "Note: This mod is only compatible with Alpha 18.2."

      Just a FYI.

      Comment


        #63
        Originally posted by Jaythomas View Post
        At first, after selecting the start quest flag, I thought the snow field disappeared.

        After I completed the fetch quest and left the building I realized it was the whole building raised itself so it's ground floor was now at the top of the snow field.

        I restarted the game all the way but didn't change anything.

        Kind of funny!

        (Tried to attache a picture but failed)
        This should be fixed now Thank you for letting us know.

        - - - Updated - - -

        Originally posted by TechieZero View Post
        On the 1st page of this post it says,

        "Note: This mod is only compatible with Alpha 18.2."

        Just a FYI.
        Thank you. I updated the post.

        Comment


          #64
          In Navasgane map, There's the Bear Den, the Bakery and the Pawn shop across from the cabinet maker. The Bakery is the building that went to the to of the snow field. The quest was a fetch quest.

          The start flag was near the rear entrance to the building and accessible by dropping down from the snow field; no digging needed to get to the flag. Hit the flag and the usual reset of the building occurred. The way it looked to me before I realized what happened was the snow field disappeared but it only the Bakery rising to the top.

          Comment


            #65
            I have been running your MOD as a Dedi. So far so good. Thanks for teaching me a lot.

            Question --- In the server listings --- how does the MOD needed flag get set when viewing the servers?

            Also seeing lots of this in the log,

            **************
            Winter Project Prefab Filter : cornfield_lg yOffset: 0 Size: 48, 2, 48
            Disabling POI that is too short. Expect the next line to be a WRN about it. Ignore it.
            2020-01-27T10:47:49 399.846 WRN Could not load prefab 'cornfield_lg'. Skipping it

            **************
            Last edited by TechieZero; 01-27-2020, 03:55 PM.

            Comment


              #66
              Originally posted by TechieZero View Post
              I have been running your MOD as a Dedi. So far so good. Thanks for teaching me a lot.

              Question --- In the server listings --- how does the MOD needed flag get set when viewing the servers?

              Also seeing lots of this in the log,

              **************
              Winter Project Prefab Filter : cornfield_lg yOffset: 0 Size: 48, 2, 48
              Disabling POI that is too short. Expect the next line to be a WRN about it. Ignore it.
              2020-01-27T10:47:49 399.846 WRN Could not load prefab 'cornfield_lg'. Skipping it

              **************
              I am not sure about your server question. I've never done it. Maybe some custom message?

              That is expected. Some prefabs were causing problems for the snow, so prefabs that would spawn below the snow line is being filtered. this should solve the problem with the giant snow blocks on the surface.

              Comment


                #67
                Originally posted by sphereii View Post
                I am not sure about your server question. I've never done it. Maybe some custom message?

                That is expected. Some prefabs were causing problems for the snow, so prefabs that would spawn below the snow line is being filtered. this should solve the problem with the giant snow blocks on the surface.
                I can't take a screenshot of it now --- but when you view the server list in-game --- the small window on the right that displays server details shows a "Mod Needed" --- "No" mostly I have seen. I wonder if it is a supported feature of the game itself.

                Comment


                  #68
                  Hi!
                  Snowballs for everyone!

                  Any place where i can see the change log of the updates?
                  Last update reset my char to level 1. (I'll try to use the console to set roughly where i was)
                  I cannot see the time anymore, is that intended?


                  Thanks!

                  Comment


                    #69
                    Originally posted by CamoesGamer View Post
                    Hi!
                    Snowballs for everyone!

                    Any place where i can see the change log of the updates?
                    Last update reset my char to level 1. (I'll try to use the console to set roughly where i was)
                    I cannot see the time anymore, is that intended?


                    Thanks!
                    Might be a little bit trickier.... My window in the mod launcher:
                    Screen Shot 01-27-20 at 11.27 PM.jpg

                    Comment


                      #70
                      Originally posted by CamoesGamer View Post
                      Hi!
                      Snowballs for everyone!

                      Any place where i can see the change log of the updates?
                      Last update reset my char to level 1. (I'll try to use the console to set roughly where i was)
                      I cannot see the time anymore, is that intended?


                      Thanks!
                      Nothing should have reset your level. I am sorry that happened to you. The latest version was updated to 18.3. Have you tried to re-install the mod using the latest?

                      Comment


                        #71
                        Originally posted by sphereii View Post
                        Nothing should have reset your level. I am sorry that happened to you. The latest version was updated to 18.3. Have you tried to re-install the mod using the latest?
                        Should be it! My local copy is 18.2
                        I will do a clean install! I have all my saves backed up, so no problem.

                        Thanks!

                        Comment


                          #72
                          Originally posted by sphereii View Post
                          Welcome to the Winter Project 2019 by sphereii and xyth
                          To Build and run Winter Project manually, you will need to use the DMT Tool, and download the following repos:

                          - https://github.com/SphereII/WinterProject-2019
                          I might not be the only person to suggest this so I apologize ahead of time --- since you wrote the tool --- is there a way for it to pull fresh info from Github without doing a download?

                          Comment


                            #73
                            Originally posted by TechieZero View Post
                            I might not be the only person to suggest this so I apologize ahead of time --- since you wrote the tool --- is there a way for it to pull fresh info from Github without doing a download?
                            I use GitHub Desktop, and I just sync up with the download. Then its incremental after that. If you are familiar with github, or git, it should be fairly easy to get started.

                            Comment


                              #74
                              Originally posted by sphereii View Post
                              I use GitHub Desktop, and I just sync up with the download. Then its incremental after that. If you are familiar with github, or git, it should be fairly easy to get started.
                              Naw don't know it. I figured it is just another Config Management tool. I will check it out.

                              Comment


                                #75
                                Originally posted by TechieZero View Post
                                Naw don't know it. I figured it is just another Config Management tool. I will check it out.
                                Yeah, install GitHub Desktop, then do the following:

                                1) Click on File -> Clone Repository
                                2) Click on URL, and copy and paste this: https://github.com/SphereII/WinterProject-2019/
                                3) Open up DMT, click on Settings and point to that mod folder where it installs from above ( Documents/Github/WinterProject-2019/Mods )

                                Then do your build. Every once in a while, re-sync Github Desktop, and rebuild.

                                Comment

                                Working...
                                X